Firmware Upgrade
Requirements
- Android or Windows computer
- USB-C cable
Download the Firmware
- Go to our releases page.
- Open the "Assets" section under the latest firmware release (
v2.0.0
or newer). - Download the
seedhammerii-vX.Y.Z.uf2
firmware file. - Save it on your computer or Android device.
Note: You may disconnect your device from the internet from this step onward.
Connect the Machine
- Plug the USB-C cable into your computer or phone. Unplug the machine.
- Locate the white firmware button on the underside of the control board near the hammerhead.
- Press and hold the firmware button.
- While holding the button, connect the cable to the machine.
- Release the button when a USB drive appears.
Important: Do not connect the machine to your device until after pressing the firmware button.
Upload the Firmware
- Drag, move or copy the firmware file to the USB drive.
The machine will automatically begin upgrading. When the screen lights up, the upgrade is complete.